Mantracourt Electronics Limited
T24-SAf Fast Strain Gauge Acquisition Module User Manual
12
Channel and Encryption
Here you can change the channel and encryption key for the acquisition module device.
Simply pair to the T24-SAf and change its channel and key.
Note that some devices such as the T24-AO1 analog output module will allow pairing to an acquisition module.
When pairing it will alter the T24-SAf settings to match those of the analog output module.
NOTE: Early acquisition module do not yet utilise the encryption keys so these should be left at all zeros.
Items you can change:
Channel
Select a channel between 1 and 16. The default is channel 1. You can use the
Spectrum Analyser mode to determine a good clean channel to use.
NOTE: Channel 16 is used to negotiate pairing so avoid this channel if possible.
Encryption Key
Only devices with identical encryption keys can communicate. You can isolate
groups of devices on the same channel or just use the key to ensure the data
cannot be read by somebody else.
