Mantiz Saturn Pro Thunderbolt 3, Руководство пользователя

Страница: 10 / 11

5. Safety and maintenance
Important safety instructions
Warning: Failure to follow these safety instructions may result in fire, electric
shock, or other injuries or injuries. To operate the computer safely and try to
avoid injury caused by high temperature, please follow the guidelines below:
▪ If you find that the device is operating abnormally and the fault cannot be
resolved, please unplug the device and call the Mantiz service hotline or
visit the Mantiz store for support.
▪ Under no circumstances should you repair the equipment yourself.
▪
Ensure that the equipment operating temperature is between 0°C (32°F)
and 40°C (104°F). If the temperature exceeds this range, please unplug
and turn off the device to stabilize the temperature to the optimal level.
▪ Ensure that Saturn Pro is on a stable desktop and does not affect the
ventilation around the computer.
▪
Do not use or install the device on water or wet surfaces. Do not use the
device around swimming pools, bathtubs, or other wet surfaces.
▪ Do not use or install the equipment near any heat or open flame sources.
Do not use the device around radiators, stoves, candles, or other heated
surfaces.
▪
Power and voltage warning. This device should only be powered by the
type of power source marked on the device. If you are not sure about the
type of power source where the equipment is used, please consult your
local power company or qualified technicians.
▪ Do not block the ventilation grids or vents. Install according to the
manufacturer's instructions.
▪ Please unplug the device before cleaning. Do not use spray or liquid
cleaners.
▪ During the operation of the device, do not place any objects on the power
adapter. Do not place the device on any unstable cart, stand or table. The
device may fall, causing personal injury and property damage (including
the product itself).
▪ In the event of thunder and lightning or if it is not used for a long time,
please unplug the device from the power supply to further protect the
device.
▪
Protect the power cord from being walked on or pinched, especially at
plugs, sockets, or the point where they exit from the equipment.
▪ Do not insert or push any foreign objects into the opening of the product.
▪ Do not overload wall outlets, extension cords, and plugs, as this may
cause a fire or electric shock.
▪
Ask qualified maintenance personnel to perform all maintenance operations. For
any reason, if the device is damaged, it should be repaired. For example, the power
cord or plug is damaged, liquid has spilled on the device, objects have fallen on the
device, the device has been exposed to rain or wet, cannot be used normally, or
Fell to the ground. Do not attempt to repair the equipment yourself. There is a risk
of electric shock when the cover is removed.