1
Table of Contents
A. Introduction . . . . . . . . . . . . . . . . . . . . . . . .1
B. Log Splitter Specification . . . . . . . . . . . . .1
C. Unpacking and Assembly Instructions . .2
D. Service Information . . . . . . . . . . . . . . . . .5
E. Special Safety Information . . . . . . . . . . . .5
1. Safety Decals . . . . . . . . . . . . . . . . . . . . . . . .5
2. Safety Warnings . . . . . . . . . . . . . . . . . . . . . .7
3. Important extension cord information . . . . .8
4. Always disconnect power cord from
power source . . . . . . . . . . . . . . . . . . . . . . . . .8
5. Hydraulic Safety . . . . . . . . . . . . . . . . . . . . . .8
F. Before You Start Splitting . . . . . . . . . . . .9
G. Operation . . . . . . . . . . . . . . . . . . . . . . . . .11
H. Removal of logs jammed on the wedge . . .12
I. How to change the hydraulic oil . . . . . .13
J. Sharpening the wedge . . . . . . . . . . . . . . .14
K. Transport . . . . . . . . . . . . . . . . . . . . . . . . .15
L. Maintenance . . . . . . . . . . . . . . . . . . . . . .15
M. Troubleshooting . . . . . . . . . . . . . . . . . . . .17
N. Storage . . . . . . . . . . . . . . . . . . . . . . . . . . .17
O. Exploded View and Parts List . . . . . . . .18
P. Mantis Warranty Policy . . . . . . . . . . . . .20
A. Introduction
The SwiftSplit log splitter is designed for residential (non-
commercial) use and makes your job less physically demanding,
more efficient and safer. With a log splitter, the log is split when
pressed against a fixed splitting wedge by a pressure plate.
Major Components, Controls, and Features Overview
:
An
electric motor assembly
provides the power for the system.
The motor is connected to a
hydraulic oil pump
that creates a flow
of high-pressure oil which runs to a solenoid valve. A switch set and
the solenoid
valve
let the operator actuate the
hydraulic cylinder
to
split a log. An internal
reservoir
holds the hydraulic oil that feeds
the pump. The
hydraulic assembly
is attached to the
wheel frame
assembly
, making it easy to move the
log splitter
around with no
lifting. The frame is equipped with folding
handles
for storage,
pivoting support
for stability and
cord storage hooks
for
convenience. This log splitter is designed with
two hand
operating controls
(two normally open switches) for safety. The
electrical motor is protected by a 15 amp
circuit breaker
and the
pressure relief valve
protects the hydraulic assembly in case a log
gets jammed. If this happens, after about 5 seconds, the pressure
plate slowly travels down to the original position and can be
immediately re-activated.
Maximum Output Force
10 000 lbs (5 tons)
Total Stroke (in)- Ram Travel
15”
Total Weight
136 lbs (61.7 Kg)
L x W x H
40” L x 20” W x 38” H
Voltage
120V
Motor 1.5
kW
Motor RPM Max
3340 RPM
Maximum Log Length
20” (520mm)
Recomd. Maximum Log Diameter
12” Dia.
Wheel Size
10” Dia.
B. Log Splitter Specification for Model #5000
Wedge
Vertical Beam
Log Guides
Pressure
Plate
Two Switches
Folding
Handle
Wheel
Frame
Assembly
Cord Storage Hooks
Connecting Link
Stabilizing Bar /
Pivoting Support
