background image

4

Electric Tiller

E.

Warnings - Do’s

Read and understand the owner’s manual. Pay
particular attention to all sections regarding safety.

1. Always keep a firm grip on both handles while the
tines are moving. BE AWARE!! The tines may coast
after the triggers are released. Make sure tines have
come to a complete stop before letting go of the tiller.

2. Always maintain a firm footing and good balance.
Do not overreach while operating the tiller. Before
you start to use the tiller, check the work area for
obstacles that might cause you to lose your footing,
balance or control of the machine.

3. Thoroughly inspect the area where equipment is to
be used and remove all objects, which can be thrown
by the machine.

4. Always keep area clear of children, pets, and
bystanders.

5. Always stay alert. Watch what you are doing and
use common sense. Do not operate unit when
fatigued.

6. Always dress properly. Do not wear loose clothing
or jewelry, they might get caught in moving parts.
Use sturdy gloves. Gloves reduce the transmission of
vibration to your hands. Prolonged exposure to
vibration can cause numbness and other ailments.

7. While working, always wear substantial footwear
and long trousers. Do not operate the equipment when
barefoot or wearing open sandals.

8. Always wear eye protection. Eye protection must
meet ANSI Z 87.1. 

9. Start the tiller carefully, according to the
instructions on page 8.

10. Keep all nuts, bolts and screws tight to be sure
the equipment is in safe working condition.

11. Use extreme caution when reversing or pulling the
machine towards you.

12. Work only in daylight or good artificial light.

13. Always be sure of your footing on slopes.

14. Exercise extreme caution when changing
direction on slopes.

15. Always keep a safe distance between two or more
people when working together.

16. Always inspect your unit before each use and
ensure that all handles, guards and fasteners are
secure, operating, and in place. Be sure that all
electrical cords are not damaged or broken.

17. Always maintain and examine your tiller with
care. Follow maintenance instructions given in
manual.

18. Always store tiller in a sheltered area (a dry
place), not accessible to children.

F.

Warnings - Don’ts

1. Don’t use tiller with one hand. Keep both hands on
handles with fingers and thumbs encircling the grips
when the tines are moving.

2. Don’t overreach. Keep a good footing at all times.

3. Don’t run with the machine, walk.

4. Don’t work on excessively steep slopes.

5. Don’t attempt to clear tines while they are moving.
Never try to remove jammed material before
unplugging the cord and making sure the tines have
stopped completely.

6. Don’t allow children or incapable people to
operate this tiller.

7. Don’t operate while under the influence of
alcohol or drugs.

8. Don’t attempt to repair this tiller. Have repairs
made by a qualified dealer or repairman. See that
only original MANTIS parts are used.

9. Don’t run the tiller in rain or wet conditions.

Содержание ElectricTiller





















Отзывы: