Mantis 2224 DAHM Скачать руководство пользователя страница 5

C.

G

ENERAL

S

AFETY

R

ULES

1. Read and understand the owner’s manual.

Pay particular attention to all sections
regarding safety.

2. Always keep a firm grip on both handles

while the blades are moving and/or the
engine is running. The right hand grasps
the front handle on double edge hedge
trimmers or the side handle on the single
edge hedge trimmers. The left hand
grasps the rear handle.

BE AWARE!!

The blades coast after

throttle trigger is released or engine is
switched off. Make sure blades have come
to a complete stop and the engine is off
before releasing a handle.

3. Keep area clear of children, pets, and

bystanders.

4. THIS MACHINE CAN CAUSE SERIOUS

INJURIES. Read instructions carefully for
the correct handling, preparation, maine-
nance, starting and stoping of the
machine. Be familiar with all controls and
the proper use of the machine. Pay partic-
ular attention to all sections regarding safety.

5. Maintain a firm footing and good balance,

do not overreach while trimming. Before
you start to trim, check the work area for
obstacles that might cause you to lose
footing, balance, or control of the machine.
While operating the machine, always be
sure of a safe and secure operating position
especially when using steps or a ladder.

6. Blades coast after throttle trigger is released

or engine is switched off.

7. Stop engine before checking, maintenance

or working on the machine.

8. Never operate without guards, handles and

safety devices in place.

9. Never attempt to use an incomplete

machine or one fitted with an unauthorized
modification.

10. To reduce fire hazard, keep engine and

silencer free of debris, leaves, or excessive
lubricant.

11. Know how to stop this machine in an

emergency.

WARNING

DANGER

IF TRIMMER IS USED IMPROPERLY OR SAFETY

PRECAUTIONS ARE NOT FOLLOWED, THE USERS

RISK SERIOUS INJURY TO THEMSELVES

AND OTHERS.

READ AND UNDERSTAND THE FOLLOWING

BEFORE ATTEMPTING TO OPERATE

THIS HEDGE TRIMMER.

!

!

!

WARNING

DANGER

THE BLADES COAST AFTER THROTTLE

TRIGGER IS RELEASED OR ENGINE IS

SWITCHED OFF. MAKE SURE BLADES

HAVE COME TO A COMPLETE STOP

AND ENGINE IS OFF BEFORE

RELEASING A HANDLE

!

!

5

D.

W

ARNINGS

— D

ON

TS

Don’t

use trimmer with one hand; keep both

hands on handles with fingers and thumbs
encircling the handles, while blades are mov-
ing and engine is running.

Don’t

overreach or stand on unstable support.

Do not stand on the top of a ladder while trim-
ming. Use proper equipment for reaching
higher heights. Keep a good footing at all
times.

Don’t

ever grasp cutting blades for any reason.

Don’t

attempt to clear cut material while

blades are moving, and the engine is running.
Never try to remove jammed material before

switching the engine off and making sure the
blades have stopped completely.

Don’t

override safety features.

Don’t

allow children or incapable people to

operate this trimmer.

Don’t

operate this hedge trimmer while under

the influence of alcohol or drugs.

Don’t

attempt to repair this hedge trimmer.

Have repairs made by a qualified dealer or
repairman. See that only original

Mantis

parts are used.

Don’t

operate the machine with a damaged or

excessively worn cutting device.

!

Содержание 2224 DAHM

















Отзывы: