PRINCE 2
u
Model 015
34
PLAYING
VCD PBC MENU
Note
: Some function keys will be differed from its origi-
nal definition even cease to function in some discs. [HAND]
The main cause is those specific discs were already con-
tained its operation function in process of manufacturing.
In this case, to operate the function key, please follow on-
screen indication for operation. The particular feature only
exists in those specific discs; it will not further affect DVD
player’s normal operation. When PBC mode is ON, even
when STOP button is pressed some discs will not go back
to PBC Menu and “ ” is shown on the screen.
– PBC OFF or Audio CD Press [
STOP
] button will stop
playback during PBC off or Audio CD playback.
ADVANCED OPERATION
OF PLAYBACK
REPEATED Playback
TITLE/CHAPTER Repeat
When the [
REPEAT
] button is pressed, the repeated
playback is triggered and the OSD message is changed in
cycles of “CHAPTER REPEAT ON”, “TITLE REPEAT ON”,
and “REPEAT OFF.”
–
CHAPTER REPEAT
- Enables the repeated play-
back of a chapter for a DVD disc or track for a Audio
CD disc or a VCD disc.
–
TITLE REPEAT
- Enables the repeated playback
of a title for a DVD disc or a disc for a Audio CD disc
or a VCD disc.
–
REPEAT OFF
- Resumes normal play.
A-B
You are able to perform a repeated playback between
any two points of a track or a chapter.
1. Press the [
A-B
] button during playback to set the be-
ginning point (A). The OSD message “A TO B SET A
“ will be shown on the right lower screen corner.
2. Press the [
A-B
] button again to set the end point (B).
The OSD message “A TO B SET B ” will be shown.
In the meantime, the repeated playback begins be-
tween the two points, A and B.
3. Pressing the [
A-B
] button again resumes normal
play. The OSD message “A TO B CANCELLED” will
be shown.
SET A
SET B
PROGRAM Playback
Here the program playback function is only available for
Audio CD, or a VCD with PBC off.
Track Program
1. Press the [
PROG
] button to program the tracks
for program playback during STOP status.
2. Use the numbers on the remote control to begin pro-
gramming. Press the corresponding track number in
the same sequence as your desired playback order.
For example: To program tracks 2, 4, 6 (in the same
order), simply press key digits [
2
], digit [
4
], digit [
6
]
sequentially.
– A number larger than 10 must be keyed by using
[
+10]
additionally. For example, “22” is keyed in by
pressing [
+10
] twice and then [
2
] once.
NOTES
: The maximum program capability is 99 tracks.
Start/Cancel the Program Playback
– Press the [
PLAY/PAUSE
] to start the program play-
back in the order that you programmed it.
– Press the [
STOP
] button to stop playback, press
[
PROG
] to reset program order, press [
PROG
] again
to cancel the program function.
– During the program playback, the [
NEXT
] button
and the [
PREV
] button can be used to advance
to the next programmed track or go back to the
previous programmed track.
Содержание Prince 2 DVD-015
Страница 38: ...PRINCE 2 u Model 015 38 Note ...
