Manta MM626 COMPRESSOR SUPREME 3, Руководство пользователя, Страница: 14 / 28

MM626 –
COMPRESSOR SUPREME 3
14
2. One or more USB port.
3. Windows 98 second edition, Windows Me, Windows
2000 or Windows XP/Vista.
4. Direct X 8.0 or above installed.
To install system driver
Insert the floppy diskette or CD ROM included into the
drive.
1. Click „Run (R)” at „Start” (which is at lower left corner
of Windows).
2. Click „Browse” to choose „Setup”.
3. Click „O.K.”
4. Run according to instructions on screen.
5. Connect up the adapter to the PS2 plug of steering
wheel first. Then, connect the USB plug to your
computer. A message of „New hardware detected”
will be displayed and a HID driver will be installed
automatically.
NOTICE:
There is no problem for plugging into the ste-
ering wheel to computer before or after the installation of
driver from disk.
6. After installation is completed, go to Control Panel of
Windows.
7. Double click icon of „Game Controllers”.
8. On the dialog of Controller, click „Add...”.
9. Select „Double Vibration Steering Wheel” from the
list of Game Controller. Then, click „OK”.
10. From Game Controller dialog, select „Double Vibra-
tion Steering Wheel”, then click „Properties”.
11. Turn steering wheel, steps foot pedals, press all but-
tons except Mode, to verify their functions.
12. Test vibration at the second page „Effect page”.
13. You can play game now.
14. Inside the game, it is best to select controller in OP-
TION or CONTROLLER to „Double Vibration Stee-
ring Wheel”. Then, select corresponding buttons for
gear shift or other functions.
15. In some games, force feedback can be set to diffe-
rent degree of different type of force. For example,
Collision, Road Grip, etc. Try these setting to get
satisfactory force feeling.
16. In some games, acceleration and brake are configu-
red to buttons. Some can be set to present configu-
ration of Gas and Brake pedals, some cannot. If not,
program the foot pedals to corresponding buttons.
In Windows XP
Just plug in the Compressor Supreme to your computer.
Windows will detect and come up „New hardware is detec-
ted”. Then, install the HID driver according to instructions
on dialog.
If no pop up menu is when the device is plugged in.
Please check the following issue.
1. If it is connected to a HUB, try to connect directly to
the computer.
2. If it is already connected to the computer, try another
USB port.
3. Do not plug in inside any running software, particu-
larly inside a game. Do it at root directory.
4. If it is connected during power up of computer,
please unplug it and plug in again when computer
start up is completed.