Manta MM446 RAIDER, Руководство пользователя, Страница: 12 / 16

MM446 RAIDER
® VACUUM CLEANER
12
˜
It may also be cleaned by using a soft bristle brush.
˜
After cleaning, place the post motor filter in its casing
or replace it with a new filter.
˜
Close the container, ensuring that it is correctly shut
Changing Filters
˜
This vacuum may be effectively used for 100 ho-
urs without changing the filters. A change in suction
power following 100 hours of use indicates that the
filters need to be changed
Cleaning
Unplug the appliance before cleaning it. Rub it gently
with damp cloth. Dry with clean dry cloth.
Never submerge the appliance in water or any in other
liquid and do not let it stand under a running tap. Do not
use solvents or abrasive products to clean it.
Breakdowns and repairs
I the event of any anomaly in the connection to the ma-
ins, do not try to replace the cord by yourself as it may be
dangerous. Take the appliance to an authorized service
center.
The same applies to any other breakdown.
This appliance was inspected thoroughly and was in
good operating condition when it was shipped from the
factory. If a minor problem occurs, it usually can be solved
quite easily when the cause is found.
Therefore, this checklist is provided for your convenien-
ce.
Troubleshooting
Motor does not start
˜
Power card not firmly plugged into outlet.
˜
Outlet damaged.
˜
Cleaner not switch on.
Suction power is weaker
˜
Unit clogged
˜
Dust filter needs cleaning
˜
Dust container not in position
˜
Filter blocked
The wire cannot be winded completely.
˜
The wire may diverge the wire wheel.
The wire cannot be draw out
˜
The wire may wind disorder
Warming:
If the supply card is damaged, It must be replaced by
the manufacturer or its server agent of a similarly qualified
person in order to avoid a hazard.
Specification
Rated voltage/ frequency: 230V/50Hz
Nominal Power: 1600 W
Maximal Power: 1400 W
Operating pressure: 22 kPa
Vacuum Power: 250 W
Sound level: 76 dB
Operating radius: 6.5M
Power Consumption: 1600W
Weight: 6.2kg