Manta MM273, Руководство пользователя, Страница: 36 / 43

MM273
36
LOADING A DISC
1. Press the FUNCTION button on unit or remote control to select “CD”
mode.
2. Press the OPEN/CLOSE button on unit or on remote control to open the
CD door, “OPEN” will be shown on the display.
3. Place an audio CD/MP3 DISC into the tray with the front side facing up.
4. Close the CD door.
5. The display will show a flashing “ -- READING -- ”, then the total number
of tracks would be shown and the playback will start from track.
6. To remove the CD, press OPEN/CLOSE button on unit or on remote to
open CD door, the display will show “OPEN”. Hold the CD by its edges,
and take it out carefully.
Note:
• Make sure the disc is stopped before opening the CD DOOR.
• To ensure good system performance; wait until the unit completely
reads the disc before proceeding.
• If no disc loaded into the tray, or the disc is unreadable, the display will
show “NO dISC”.
PLAYING A DISC
1. The playback starts from track 1 automatically when reading the disc.
To pause playback, press button on unit or on remote. The current
playing time will flash on the display. To resume playback, press
button on unit or on remote again.
2. To stop playback, press button on unit or STOP/MO/ST. key on
remote, the total number of tracks.
SELECTING A DESIRED TRACK/PASSAGE
To select a desired track
• Press the or button on unit or remote respectively in stop mode or
during playing until the desired track appears on the display. Press the
button on unit or on remote to start play.