Manta MHC910, Руководство пользователя, Страница: 12 / 48

12
1. B
egin by carefully combing through hair to smooth it. Then take a 1.5 cm
to 2.5 cm section(Fig. A) .
Do not try to curl larger sections of hair at
one time!
2.
Please note the styler must be positioned into the hair with the opening of
the curl chamber facing toward the head(Figure B).
3.
Position the styler where you want the curl to start. The hair section must
be straight, and placed neatly through the center of the hair guide(Figure C
and D).
4. Once the hair is in place, let go of the hair section and squeeze the trigger
to allow the hair to be automatically taken into the curl chamber(Figure E).
5. Hold the styler still, with the trigger held together, until the end of the
individual beeps. There will then be three quick beeps in succession. This
indicates that the time is up and you can release the trigger and remove
the styler from your hair. Gently pull it away from the head to release a
perfect cur(Figure F)! Let it cool in place for a minute to set the cur
MOST IMPORTANT: In case hair does get tangled, unplug the unit and gently
work the hair out of the unit. Take very small strands one at a time and slowly
remove from the chamber. If hair is tight around the barrel, carefully and
gently loosen up hair outside of the tool with your fingers removing small
sections at a time. Make sure fingers do not come in contact with heated
chamber
NOTE: Always release the trigger first to set the curl free; if you pull away
before you release the trigger, the curl will be straightened out.
• To allow the curl to set, do not comb or brush the hair until it cools.
• Repeat around the head until you have the amount of curls desired.
User’s Manual EN