12
System Connections
Connecting to a PC
The unit can be connected to a PC via the VGA cable and PC audio cable.
1. Connect one end of the VGA cable to the VGA
jack on the jack panel of the unit and the other
end to the PC VGA output.
2. Connect one end of the audio cables to the PC
IN jack on the jack panel of the unit and the
other end to the PC audio output jack.
3. Set the PC video resolution to match that of the
television (Native 1920 x 1080@60Hz).
4. After connection, turn on the power of the unit
and the PC.
5. Press INPUT then direction buttons to select
PC
mode, and then press the
ENTER button to confirm.
Connecting to TV-Signal Input
Connect the TV signal cable (the antenna cable, for example)
to the RF input Jack on the back of the unit so that you can
receive television programs.
1. Connect TV signal input source from the aerial to the RF
input jack on the rear panel of the unit.
2. After connection, turn on the power of the unit.
3. Then press the INPUT button and the direction buttons to
select
TV
mode, press the ENTER button to confirm and
conduct program selection.
