12” LCD TV
– 1201
1
Select items with
lub
button, adjust the selected
item or perform the selected operation with
or
but-
ton.
Operation of menu under Computer Mode
Press MENU button to pop up the following menu:
Press
or
button to select the three sub-menus:
„PC”, „FUNCTION” and „OSD”.
Operation of „PC” menu
Press
or
button to select the sub-menu of „PC”
as shown in the above figure.
Select items with
lub
button, adjust the selected
item or perform the selected operation with
or
but-
ton.
Note
:
Operation of sub-menu including „Function” and „OSD”
is same as that in TV mode. Please refer to the operation
method under TV mode
Supporting display modes
Recommended Mode: 1024 768@60Hz
Note:
This machine is controlled by micro computer. In case of
nay function failure, please firstly disconnect power supply
of the machine. Power the machine on a few seconds later
for machine reset. If it becomes normal after that, the ma-
chine is available for normal use.
Before you request
for repair
Phenomena below are not necessary mean broken TV
set. Please check off per following methods before you re-
quest for repair.
No picture, no sound
Improper connection with AC adapter or Automobile
adapter. Use of unauthorized power supply. Power Switch
is on OFF position.
No picture
Whether the correct Channel is selected. Automatically
set up the Receiving Channel again. Any new place is sub-
ject to re-setup of channels.
No sound
Whether the sound is turned to end or under an incorrect
Sound System. Whether earphone is plugged in. Muffle
actions under too weak signal.
Dark picture
Whether Bright and Contrast is adjusted correctly; May-
be too weak signal at the receiving place.