EMPEROR 2
u
Model 007 & 007S
42
–
REPEAT OFF
- Resumes normal play.
A-B
You are able to perform a repeated playback between
any two points of a track or a chapter.
1. Press the [
A-B
] button during playback to set the be-
ginning point (A). The OSD message “A TO B SET A
“ will be shown on the right lower screen corner.
2. Press the [
A-B
] button again to set the end point (B).
The OSD message “A TO B SET B ” will be shown.
In the meantime, the repeated playback begins be-
tween the two points, A and B.
3. Pressing the [
A-B
] button again resumes normal
play. The OSD message “A TO B CANCELLED” will
be shown.
SET A
SET B
PROGRAM Playback
Here the program playback function is only available for
Audio CD, or a VCD with PBC off.
Track Program
1. Press the [
PROG
] button to program the tracks
for program playback during STOP status.
2. Use the numbers on the remote control to begin pro-
gramming. Press the corresponding track number in
the same sequence as your desired playback order.
For example: To program tracks 2, 4, 6 (in the same
order), simply press key digits [
2
], digit [
4
], digit [
6
]
sequentially.
– A number larger than 10 must be keyed by using
[
+10]
additionally. For example, “22” is keyed in by
pressing [
+10
] twice and then [
2
] once.
NOTES
: The maximum program capability is 99 tracks.
Start/Cancel the Program Playback
– Press the [
PLAY/PAUSE
] to start the program play-
back in the order that you programmed it.
– Press the [
STOP
] button to stop playback, press
[
PROG
] to reset program order, press [
PROG
] again
to cancel the program function.
– During the program playback, the [
NEXT
] button
and the [
PREV
] button can be used to advance
to the next programmed track or go back to the
previous programmed track.
TITLE MENU (DVD Only)
Some DVD discs have a title menu recorded within them
to use for selecting titles for play. This feature will only work
with these discs.
– Press the [
TITLE
] button during playback to reach
the title menu. Pressing the [
TITLE
] button again
resumes the playback of the scene when the [
TITLE
]
button was first pressed.
DVD TITLE MENU
– Use the [
t
] [
u
] [
p
] [
q
] buttons to control the direc-
tion and press the [
PLAY/PAUSE
] button to select
the preferred title or you can directly press the nume-
ric buttons to select the title.
NOTE
: DVD discs are divided into units referred to as
titles, and titles are divided into chapters. Menu screens
do not belong to any title. A disc that contains a movie may
have only one title with many chapter divisions.
DVD MENU (DVD Only)
Some DVDs have complex contents such as multi-sub-
title, multi-audio, or multi-angle. In these cases, you may
use the DVD menu to select audio language, subtitle lan-
guage, and angle.
1. Press the [
MENU
] button during playback to display
the DVD menu, if it is available on the disc.
2. Use the [
t
] [
u
] [
p
] [
q
] buttons to control the direc-
tion and press the [
PLAY/PAUSE
] button to select
the preferred item. Or you can directly press the nu-
meric buttons to select the item.
Содержание Emperor 2 DVD-007
Страница 46: ...EMPEROR 2 u Model 007 007S 46 Note ...
