MINI HI-FI SYSTEM
35
disc does not influence the quality of playing. In order to
view the contents of the USB device, following operations
need to be performed.
1. Press the DVD/USB button on the remote control
once, the dialogue window will appear on the screen.
Use Up/Down direction to select the required option.
2. Press the Play/Enter button to switch on the selected
option.
3. If a disc is not loaded, the player will automatically
check the presence of USB device. If one of these
appliances is found, the player will automatically
start playing its content or displays screen menu of
the appliance.
4. To exit the USB mode: Press the DVD/USB button
again, and move the cursor to ``DVD`` item, and then
press Play/Enter button.
NOTE
:
If you are using a USB extension cable, this cable should
be limited to max. 0.5m.
TV FUNCTION
1. Before operating the TV function, please connecting
the TV antenna with this unit. Then press the TV but-
ton on the remote control to enter TV mode.
2. While in TV mode, you can use the following buttons
on the remote control.
– LANG(L/R): Press to switch the different TV modes.
– TONE: Press to adjust the volume of Treble, Bass or
Subwoofer.
– TU+/- (TUNE+/-): Press to increase/decrease the
frequency.
– CH+/- (/-): Press to go to the next/previ-
ous channel.
– Number Buttons: Press to select channel. For ex-
ample, press the 2, 0 buttons, and then press PLAY/
ENTER button to confirm, you can switch to the 20th
channel.
3. While in TV mode, press the TV button, the TV
screen shows the following picture, press the TV but-
ton again to close it.
– Where are 9 options for selecting:
CH+/- (/-): Select to go to the next/previous
channel.
Add CH (Add channel): Select to add the current chan-
nel.
FQ+/- (Fr/-): Select to increase/decrease the
frequency of current channel, and make the current chan-
nel clearer.
Del CH (Delete channel): Select to delete the current
channel which is not clear.
Quick Scan: Select to search channel forward.
All Scan: Select to search channel forward. (By the step
of 1 MHz.)
Audio Mode: Select the audio mode for the current
channel.
– Note: Press the direction buttons to move the cursor
to the option you want, then press the PLAY/EN-
TER button to confirm.
4. To exit the TV mode: Press the AV-IN, FM or DVD/
USB button on the remote control (or long press the
SELECT button on front panel), and the unit will en-
ter other modes.
FM RADIO OPERATION
1. Enter FM Function
In the turn-on or playing status, press the FM button on
the remote control to enter FM status.
2. Select Bands
– Directly input frequency: press the T/F button on the
remote control; input the frequency that you want
directly.
– Select band by pressing Tune- or Tune+ button: un-
der some frequency, press the button, the frequency
will be up or down on the step. The step of FM is
0.05 MHz.
– Select band by pressing number buttons: you may
select the bands that have been saved by pressing
the number buttons. For example: press 10+ but-
ton twice, 5 button once, you may select the 25th
band. Press the CH- or CH+ button, the band will be
switched up or down.
– Automatically search bands: press the Search but-
ton, this unit will start to search bands from the low-
est part to highest part automatically. Meanwhile the
searched bands will be saved orderly. Press the but-
ton again to stop searching.
3. Save Bands
Press the Save button, that means saving the current
frequency of band. For example: If you want to save 99.3
MHz in 28th, please press 10+ button twice, 8 button once,
then press T/F button to input 993, then press Save button
to save this frequency.
4. Soundtrack Selection
Press MO/ST button on the remote control, you may se-
lect Mono and Stereo soundtrack output in FM status. If the
signal is not strong enough, you can not select Stereo.
5. Exit FM Status
Press the DVD or Audio-in button to exit FM status and
enter other modes.