Manta DVD-049, Руководство пользователя

Страница: 35 / 40

DVD-049
EMPEROR BLACK 2
PCM Select this option when you are going to use ste-
reo signals (2 channels). You should
combine this option with the option „Lower sampling
rate,” which we explain further on
All If you select this option the player will use the DVD’s
original audio track. Use this option when you want to use
the Dolby Digital AC3 signals through the optical or coaxial
audio output.
Down Sampling
Use the down sampling option when you have selected
the “PCM” option in the type of digital audio output:
- ON: Use this option to lower the audio sampling rate.
- OFF: Use this option to deactivate the lowering of the
audio sampling rate.
Note: A certain sampling rate is used to record disks
(measured in kHz); the higher this sampling rate, the bet-
ter the sound quality. If you turn it off, make sure that the
amplifier that you are using is compatible with 96kHz digi-
tal signals.
Rating setup
Select Rating in the setup menu, and display the Rating
submenu:
Note: Not all DVDs support ratings.
Parental Control
Selecting a Rating allows the user to set the parental
control feature of the player
Select Parental Control, and press ENTER to change
the different mode.
Note: Unlock the password before setting Parental Con-
trol
Set Password
Use the 0-9 keys to input four digits (password), then
press ENTER to confirm.
Note: If you forget your password, please use the univer-
sal password 8888 to unlock.
Misc setup
Select MISC in the setup menu, and display the sub-
menu:
Reset setup data to factory default and re-load disc
Troubleshooting
˜
Check the following guide for a possible correction to
a problem before contacting customer service.
˜
Symptoms and Correction
No power
˜
Connect the power plug into the wall outlet securely.
Or no press ON/STANDBY/OFF button
No picture
˜
Verify the connection from the DVD video output to
the TV video input. Then switch TV to appropriate
mode (video 1)
˜
Connect the video cable into the jacks securely.
Refer to your television owners manual.
No sound
˜
Connect the audio cables into the jacks securely
˜
Verify the connection from the DVD audio output to
the TV or receiver audio input. Then switch to the ap-
propriate source on the receiver. Refer to your audio
amplifier owners manual.
Black & White picture
˜
Damaged S connector (bent pin)
˜
The playback picture has occasional distortion
˜
A small amount of picture distortion may appear be-
cause of a poor quality video/sound transfer to disc.
This is especially true of some discs manufactured
between 1997-1998.