DVD-024 & DVD-025
u
PRINCE 3
41
– Connect the video cable securely into the appro-
priate jacks.
– Select the appropriate video input mode on the TV
so the picture from the DVD video player appears
on the TV screen.
Picture Distorted
– The disc is dirty and needs to be cleaned.
– It is normal for some distortion to appear while
Fast Motion Playback.
Picture not Suit TV Screen
–
Change “TV SCREEN” setting in DVD Setup Menu
to suit your television.
SOUND
No Sound
– Check the connections.
– Check the volume on the equipment you have
connected.
– Connect the audio cable securely into the appro-
priate jacks.
– Ensure that the input settings for the television
and stereo system are correct.
– IF the player is in mute mode, please press “Mute”
button again to turn on sound.
No Stereo Sound Effect when
Playing Video CD or CD
– Check the connections.
– Press “Stereo” button to select stereo sound.
THE REMOTE CONTROL
DOES NOT WORK PROPERLY
– Remove the obstacle existing between the DVD
player and the remote control.
– The remote control is too far from the DVD video
player. Operate the remote control within opera-
ting distance.
– Point the remote control at the remote sensor of
the DVD video player.
– If the batteries in the remote control are exhau-
sted, please replace batteries with new ones.
THE DVD PLAYER DOES NOT START PLAYBACK
– No disc is inserted. (“No disc” symbol appears on
the screen). Please insert disc.
– The disc is placed upside down. Place the disc
with the playback side down.
– The disc is dirty. Please clean the disc.
Specifications
Wavelength:
650nm
Signal System:
PAL/ AUTO/ NTSC
Frequency Response:
4 Hz~20,000 Hz
Signal to Noisy Ratio:
≥
100dB
Audio DisNoise: ≤80dB(1KHz)
Audio Dynamic Range:
≥
100dB(1KHz)
Output
Audio output (Analog audio) average output:
2V±10%, Load: 10K
Ω
Audio output (Digital audio) average output:
0.5Vp-p±20%, Load: 75
Ω
Video output average output:
1Vp-p±20%, negative sync, Load: 75
Ω
Color difference output:
Luminance (Y) 700mv±20%;
Color (Cb) 535.5mv±20%, Color (Cr) 535.5mv±20%
S video output average output:
Luminance signal (Y) 1Vp-p±20% (75
Ω
load)
Color signal (C) 0.286Vp-p±20%, (75
Ω
load)
Power Supply:
AC100V~240V; 50/60Hz
Содержание DVD-024
Страница 42: ...DVD 024 DVD 025 u PRINCE 3 42 Note ...