Manta DVD-002, Руководство пользователя

Страница: 34 / 36

DVD
-002
Basic Extended Version
34
system in the videodisk player so as to be able to re-
occur the vivid theatrical effect.

STEREO (stereo sound): In the time of Track 5.1
output, audio frequency outputs two lines of signals
by way of right and left tracks; in the case of output
by both tracks, the audio output is a common stereo
signal.
DIGITAL SETUP
(Dolby digital setup)
The setup structural chart is as follows:
OP MODE (Output mode)

LINE OUT (Line output): Perform linear compact for
input signals. Lower volume is relatively adaptable to
uses at night.

RF REMOD(RF adjustment):Greater volume is su-
ited to uses by day.
Troubleshooting
Before requesting service for this player, check the items
below for a possible cause of the problem you are expe-
riencing. Some simple checks or a minor adjustment on
your part may eliminate the problem and restore proper
operation.
PICTURE
No Picture
– Ensure that the equipment is connected properly.
– Connect the video cable securely into the appro-
priate jacks.
– Select the appropriate video input mode on the TV
so the picture from the DVD video player appears
on the TV screen.
Picture Distorted
– The disc is dirty and needs to be cleaned.
– It is normal for some distortion to appear while
Fast Motion Playback.
Picture not Suit TV Screen
– Change “TV SCREEN” setting in DVD Setup Menu to
suit your television.
SOUND
No Sound
– Check the connections.
– Check the volume on the equipment you have
connected.
– Connect the audio cable securely into the appro-
priate jacks.
– Ensure that the input settings for the television
and stereo system are correct.
– IF the player is in mute mode, please press “Mute”
button again to turn on sound.
No Stereo Sound Effect when
Playing Video CD or CD
– Check the connections.
– Press “Stereo” button to select stereo sound.
THE REMOTE CONTROL
DOES NOT WORK PROPERLY
– Remove the obstacle existing between the DVD
player and the remote control.
– The remote control is too far from the DVD video
player. Operate the remote control within opera-
ting distance.
– Point the remote control at the remote sensor of
the DVD video player.
– If the batteries in the remote control are exhau-
sted, please replace batteries with new ones.
THE DVD PLAYER DOES NOT START PLAYBACK
– No disc is inserted. (“No disc” symbol appears on
the screen). Please insert disc.
– The disc is placed upside down. Place the disc
with the playback side down.
– The disc is dirty. Please clean the disc.
If you are in doubt about some of the following items
or if the remedies indicated in the chart do not solve
the problem consult your local dealer for service.