Manta 1906, Руководство пользователя

Страница: 19 / 24

LCD TV SET WITH MONITOR FUNCTION
® 1906
19
FINE TUNE : Press [V-]/[V+] for fine tuning.
AFT : select the function of Auto frequency control with
the key V+/V-.
NOTE
Press [P+]/[P-], move cursor to relevant item.
Press [V+]/[V-], tune value.
Value range of each item is 0~199.
EXCHANGE
The following picture is the sketch map of the feature
menu.
The definition of each option:
PROGRAM
: The present PROGRAM No.
EXCHANGE TO
: The exchange PROGRAM NO.
EXCHANGE
: Press [V+]/[V-] in EXCHANGE to confirm
exchange, or quit by pressing [MENU].
Menu Operation in VGA/
YPbPr State
Display NO SYNC PLEASE CHECH CABLE in the mid-
dle screen without signal input. The blue light glitters after
30 seconds. [Menu] and number key is unavailable. Switch
to other source by [TV/AV].System goes to standby after
30 seconds of no signal waiting.
Display UNSUPPORT MODE PLEASE ADJUST RE-
SOLUTION in the middle screen overstep display range.
Only PICTURE SOUND and FEATURE menu can work
when there’s signal input.
Only BRIGHTNESSS, CONTRAST and PC YPbPr AD-
JUST can be adjust in the picture menu.
PC YPbPr ADJUST menu is different as below. De-
scription:
H POS : Adjust the Horizon position.
V POS
: Adjust the Vertical position.
H SIZE
: Adjust the Horizon size.
PHASE : Adjust the Sampling phase.
COLOUR TEMP
: Setting for color temperature as be-
low: NORMAL 6500 9300 NORMAL
AUTO ADJUST : Press V+ to automatically adjust.
When carry out AUTO ADJUST, will display
picture as following:
RESET
: Reset H POS, V POS, H SIZE, PHASE.
Troubleshooting
No picture or sound.
˜
Check if the power supply is plugged in.
˜
Check if the power switch is in “on’” position.
Picture is OK, no sound.
˜
Check if the volume control is set to the minimum or
mute position.
Remote control doesn’t work
˜
Check if the power switch is in “on” position.
˜
Check if the batteries are out of use or not connec-
ted well.
˜
Make sure that there is no strong light striking the
sensor window of remote control unit.
˜
Check there are no obstacles between the sensor
window and remote control unit.
No TV signal
˜
Check if the TV/AV button is not set to TV status.
˜
Check if the antenna is well connected.
˜
Check if you installed the TV correctly.