Manta 1903, Руководство пользователя, Страница: 22 / 28

LCD MONITOR WITH TV SET
® 1903
22
Image
Pic Mode
Custom
Brightness
70
Contrast
65
Hue
0
Saturation
80
Back Light
100
Sharpness
3
Color Temperature
Cold
E
:
Select
"
:
Enter Source
:
Return
OSD
Channel
Press the ‘up/down’ key on the front panel or telecontrol
device to choose Channel. Press the ‘left/right’ key on the
telecontrol device or the ‘ +/-’ key on the front panel and
then press’ up/down’ key on the front panel or telecontrol
device to choose the submenu: Current CH, Color Stan-
dards, Sound Traps, Fine Search, Status, Exchange CH,
Auto Search, Manual Search. After choosing submenu,
press the’ left/right’ key on the telecontrol device or ‘+/-’ key
on the front panel to adjust.
Channel
Current CH.
1
Color Standards
AUTO
Sound Traps
1
Fine Search
145.30
Status
Remain
Exchange CH.
1
Auto Search
Manual Search
E
:
Select
"
:
Enter Source
:
Return
OSD
After choosing Color Standards, you can choose the fol-
lowings modes by pressing ‘left/right’ key on the telecontrol
device: AUTO ,NTSC, PAL. After choosing Sound Traps
you can choose the following modes by pressing’ left/right
‘key on the telecontrol device: I, D/K, M/N,B/G. After cho-
osing Status, you can have the following modes: Remain,
Skip. After choosing Auto Search by pressing ‘OK ‘control
key, The monitor will automatically search and store chan-
nel from low frequency to high frequency and display rece-
ived channel band and frequency and so on at the same
time and then press ‘OK’ key again. The search will stop.
After choosing manual search by pressing ‘OK’, you can
have Amount, Band, Frequency. Search will stop again by
pressing’ OK’ key on the telecontrol device.
Sound
Press the’ up/down’ key on the front panel or telecontrol
device to choose Sound. Press the’ left/right’ key on the te-
lecontrol device or the ‘ +/-’ key on the front panel and then
press ‘ up/down’ key on the front panel or telecontrol devi-
ce to choose the submenu: Source, Sound Mode, Volume,
Balance, Bass, Treble, NICAM, Mute. The way for opera-
tion is the same as the way in operating VGA submenu.
OSD
(The adjustment method is the same as VGA)
Advanced Tools
Advanced Tools
Timer
Reset
E
:
Select
"
:
Enter Source
:
Return
OSD
Press the up/down key on the front panel or telecontrol
device to choose Advanced Tools. Press the left/right key
on the telecontrol device or the +/- key on the front panel to
choose Timer or Reset submenu. When you select Timer