11” LCD TV
– 1101
17
ived, the channel storage system will automatically
identify it as no signal.
SOUND SYS
Press CH+ or CH- to select Sound-sys item
Then press VOL- or VOL+, the Sound System displays
in the order of I, DK, BG and L.
Notice
1.
Notes on Sound System: 6.0M means I, 6.5M stands
for DK(L) , and 5.5M is BG, please set the Sound
System at local one.
2.
Color system (all color system are auto setup)
A. While sound system is I, color system is PAL-I
B. While sound system is DK, color system is PAL-DK
or SECAM-DK
C. While sound system is BG, color system is PAL-BG
or SECAM-BG
D. While sound system is L, color system is SECAM-L.
3.
In case with picture while without sound or with
noise, please check the Sound System for correct
setup first.
Notice
1.
In AV input or TV status, press MODE key to display
modes bellow: standard, soft, vivid, light, personal
and 16:9(or 4:3).
2.
While selected 16:9(or 4:3) item, press VOL+/VOL- to
shift between 16:9 and 4:3 mode.
COLOR-SYS
: Press the VOL-/VOL+ button to switch
among PAL, NTSC and SECAM in turn.
VGA Mode
Under VGA mode press MENU to display as bel-
low:
BRIGHT, CONTRAST, H.POSITION, V.POSITION,
CLOCK, PHASE, SHARPNESS, BLUE BACK, OSD V,
OSD H, OSD CLOCK, ENGLISH, COLOR TEM, RED,
GREEN, BLUE, AUTO, INPUT, RESET, EXIT, VOLUME,
MUTE
Auto
Press CH+/CH- to select Auto adjust, press VOL+/
VOL- can adjust the analog quantity of bright, contrast,
H.position, V.position, clock, phase etc.
Screen will display AUTO ADJUST ...... After seconds,
auto adjust finish, the monitor has been adjusted to the
best state.
Reset
Press CH+/CH- to select RESET item, press VOL+/
VOL- can set bright, contrast, OSD V, OSD H, clock, color
temperate etc of picture to factory default.
Clock
Can change the size of picture.
Sharpness
Adjust the edge sharpness in low resolution.
Blue back
Set blue back on/off under no signal.
OSD clock
Press CH+/CH- to select OSD clock, press VOL+/VOL-
can adjust the time of OSD menu display (5 -100s).
Language:
Press CH+/CH- to select language, press VOL+/VOL-
can realize the switch of German, French,
Dutch, English,
Spanish, Portuguese, Chinese, Russian and Italian OSD
menu language.
Color Temp.(900K,00k, USER)
Press CH+/CH- to select color temp., press VOL+/VOL-
can realize the switch of 9300k, 6500k mode.
Notice
In VGA status, please set the resolution of desk to be
640 480/32bit real color/60Hz V-frequence. This is the best
display mode for the TV set.
In order to receive clearer picture
Adjust the length, angle and direction of the telescopic
antenna to obtain optimum image. Draw back the antenna
from the butt end after usage.
Caution
