INFORMATION:
The LH thread of the Propeller Hub ensures that it is self-tightening while the
Propeller is driven. With the fine thread extra caution must be taken not to cross thread with that
of the Frame. To find the beginning of the thread, slowly rotate the Hub clockwise until you can
feel it step off the first thread. Now rotate anti-clockwise to fasten. No torque value is specified
but strong hand tight will be sufficient as the minimum torque required.
6. Fit Strut Cowl
TOOLS REQUIRED
ID
Description
Task
N/A
Hex Key 3 mm
M4 Cap Screws
6.1 Position the RH Strut Cowl to align with the LH Strut Cowl. Gently push the bottom of the trailing edges
of the two cowl halves together until you hear a clicking sound as the trailing edges interlock.
