This tutorial shows how to replace the propeller drive shaft
Before you start: For this work instruction it is assumed that the XE-1 is upright and supported by the foils.
In a configuration where the bike is supported in a workshop or inverted on the handlebars and seat, the
Rear Foil can be removed and the task can be performed without having to remove the Chain Guard and RH
Rear Buoyancy.
1. REMOVE CHAIN GUARD (only required if Rear Foil is fitted)
TOOLS REQUIRED
ID
Description
Task
N/A
2.5 mm Hex Drive / Allen Key
Loosen 8 Gauge Machine Screws
1.1 Remove the five 8-Gauge Machine Screws that is used to attach the Chain Guard to the RH Rear
Buoyancy. [Tools: 2.5 mm Hex Drive]
1.2 Remove the transparent acrylic Chain Guard over the RH Crank and Pedal.
