Operation
Display
Indications
Standby
Standby Mode
Steady light on:
AC connected but charger not yet connected to battery
Blinking light on:
Battery connected, charger ready for battery selection. User has one minute to select
battery before charger returns to last selected battery type.
Check & Repair Mode
Steady light on:
For a few seconds for normal battery while charger checking on battery condition.
Steady light on: for longer than a minute, charger in desulphating repair charging
ONLY FOR LEAD BATTERY
Steady light on:
For longer time, charger in *desulphate charging.
Blinking light on:
When connected to battery showing the battery is not suitable for charge.
Blinking light on:
Charger in charging mode longer than 40 hours or more than 8 hours in desulphating
repair charging of LEAD battery.
Alarm Warning:
The alarm warns charging faults check following possible causes
Steady light on:
output connection in reverse polarity or short circuit protection causing no charging/
output shutdown.
In group of 2 flashes pattern:
Output over-voltage protection & output shut down.
In group of 3 flashes pattern:
charger over-temperature protection & output shut
down.
Charge Mode: battery Not Full
Steady light on:
Charging in progress, may be in sulphating, soft start bulk, bulk &
absorption.
Battery is less than 70% full and may be in any of the above charging stage.
Float Charge Mode: battery Full
Steady light on:
Charger is in Float mode/ Maintenance pulse mode.
Battery is fully charged.
LEAD
Steady light on:
charge battery at room temperature
Blinkering light:
charge battery at cold temperature
AGM
Steady light on:
charge battery at room temperature
Blinkering light:
charge battery at cold temperature
LiFePO4
Steady light on:
charge battery at room temperature
