Manning MSP250 Скачать руководство пользователя страница 12

 

10 

Manning Environmental Limited Factory Warranty 

Manning Environmental, Inc., warrants this product to the original purchaser against any defects that are due to 
faulty workmanship or material for a period of one year (365 days) from the date of shipment. 
 
During the warranty period Manning Environmental, Inc. will repair or replace, at its sole discretion, any defective 
equipment or parts.  Manning’s liability is strictly limited to repair and/or replacement.  Any product repaired or 
replaced under this warranty will be warranted only for the remainder of the original product warranty period. 
 
This warranty does not apply to consumable products or consumable components of products such as, but not 
limited to tubing, intake hose, differential pressure switches and bottles. 
 
Items may not be returned without authorization from Manning Environmental, Inc. 
 
This warranty applies only to products sold under the Manning trademark and is the sole express warranty made 
by Manning Environmental, Inc.  All implied warranties, including without limitation, the warranties of 
merchantability or fitness for a particular purpose, are disclaimed.

 

 

Limitations: 

 
This warranty does not cover the following: 
 

1.  Damage caused by acts of God, natural disaster, labor unrest, acts of war (declared or undeclared), 

terrorism, civil strife or acts of any governmental jurisdiction 

2.  Damage caused by normal wear, neglect, misuse, accident, corrosion or improper application or 

installation 

3.  Damage caused by any repair, attempted repair or modifications not authorized by Manning 

Environmental, Inc.  

4.  Any product not used in accordance with the instructions furnished by Manning Environmental, Inc. 

5.  Freight charges to return merchandise to Manning Environmental, Inc. 

6.  Freight charges on expedited or express shipment of warranted parts or products. 

7.  Travel and lodging fees associated with on-site warranty repair 

8.  Manning 6.1 cubic foot refrigerators, which are covered under the refrigerator manufacturer’s warranty 
9.  Labor performed at the factory to clean the equipment so that it can be safely and properly repaired 

 
This warranty constitutes the final, complete, and exclusive statement of warranty terms.  Manning Environmental, 
Inc. does not authorize any other person to make any other warranties or representations on its behalf.   
 
In no event shall Manning Environmental, Inc. be liable for any incidental or consequential damages of any kind 
for breach of warranty or negligence.  The remedies of repair or replacement as stated above are the exclusive 
remedies for the breach of this warranty. 
 
A Return Material Authorization (RMA) must be obtained prior to sending any equipment to Manning for warranty 
service.  Contact the Manning Service Department at: 
 
Manning Environmental, Inc. 
101 Bar T Drive 
Florence, Texas 76527-4445 
Phone:  254-793-9955, Fax:  254-739-9965 

 

Some states within the United States do not allow the disclaimer of implied warranties and if this is true in your state the above limitation 

may not apply to you.  This warranty gives you specific rights- you may also have other rights that vary from state to state.

 

Содержание MSP250













Отзывы: