Introduction
2
1
Introduction
These installation and maintenance instructions are intended to familiarize you with the 2nd generation ProVent²
500 oil separator and its intended use. The installation and maintenance instructions contain important
information on the safe, proper and economical operation of the components. Observing these instructions
helps to avoid dangers and to increase the reliability and service life of your machine. The instructions must be
made available to any person who is entrusted with work on the device. In principle, the existing national
regulations for environmental protection (especially for the disposal of dismantled parts), the general accident
prevention regulations and other generally recognized safety and occupational health regulations must be
observed.
Non-compliance with the installation and maintenance instructions and the safety instructions contained therein
can endanger persons, the filter system and the environment.
It is also essential to observe the safety instructions on the respective MANN+HUMMEL filter system or in its
respective documentation!
Note for the operator:
According to the Work Equipment Usage Ordinance, the operator is responsible for providing work equipment
that meets the basic safety and health requirements. This also includes using these work equipment in such a
way that it is only used within the scope of its intended use. In addition to the maintenance intervals specified in
the installation and maintenance instructions, the operator can also define his own inspection plans and
intervals.
2
Manufacturer and publisher
MANN+HUMMEL GmbH
Industrial Filtration
Brunckstraße 15
67346 Speyer, Germany
Phone:
+49 (62 32) 53-80
Fax:
+49 (62 32) 53-88 99
Internet:
www.mann-hummel.com
E-Mail:
3
Disclaimer
These safety instructions should not be regarded as a substitute for, but as a supplement to, the documentation
of the respective MANN+HUMMEL filter system. The manufacturer has compiled them to the best of his
knowledge. You cannot hold the manufacturer responsible for the function of the product in its final application
over which he has no influence. You must observe these safety instructions and the documentation enclosed
with the filter system and convince yourself of the safe usability of the product in its application by means of your
own tests and release. Therefore, the manufacturer cannot be held liable for machine failures, damage or
personal injury related to product failure in the application.