manualshive.com logo in svg

MANN+HUMMEL NLG Series, Руководство по эксплуатации, Страница: 5 / 9

Поделиться
Скачать
MANN+HUMMEL NLG Series Скачать руководство пользователя страница 5

MANN+HUMMEL Industrial Filters 

5

NLG 

5.  Maintenance/repair

Only carry out cleaning, maintenance 

and repair work when the assembly is 

switched off (motor, compressor, fan, 

or similar). Never operate when the fil

-

ter element has been removed.

5.1  Maintenance schedule

Component

Task

Maintenance time

Main element

Replace 

(if the main element cannot be 

replaced, it can be cleaned if nec-

essary, as described in Section 

5.2.2)

As per the operating instructions for 

the respective devices or motors, 

after the maintenance indica-

tor/switch has triggered or after 2 

years at the latest

Secondary element 

(optional)

Replace

After maintenance has been per-

formed on the main element 5 

times or after 2 years at the latest

Dust discharge valve (if available)

Check for damage/function and 

clean

Depending on the dust concentra-

tion in the environment (e.g. daily if 

large amounts of dust)

Plastic housing

Check for damage and cracks

When performing maintenance on 

the filter

Maintenance display/switch (on 

clean air tube)

Check function 

1)

Annually

1)

 In order to attain the maximum permitted vacuum in the air intake system, reduce the size of the intake opening 

slowly while the motor is running by covering it (e.g. with a piece of card or a metal plate) until the maintenance 

indicator/switch triggers.

After the maintenance indicator has triggered, do 

not

 continue to reduce the size of the intake opening as this will 

cause damage.

After the test, reset the maintenance indicator by pressing the reset button.

Содержание NLG Series










Отзывы:

Нет отзывов