5. Packing List
G.W: 0.75kg per unit, 20pcs/CTN, 16kg/CTN, CTN Size: 55cm X 34.5cm X 32.5cm
6. Installation and Connection
The Condition for Installation
The terminal asks for 110-220V AV power supply. It must be installed in the area where the
GSM network can cover. The strength of the signal can affect the quality of voice.
1.
Screw off the screws that are on the back of the terminal, insert SIM card for every SIM
card holder, and then tighten the screws.
2.
Install antenna. To ensure the quality of the voice, antenna must be put beyond 1.5m
from the telephone and terminal
3.
One end of the telephone line connects to the “Phone” port of the terminal, the other end
connects to the telephone.
4.
“Power” port connects to power adapter that is connected to 110-220V AC power supply.
1) The Installation for Connecting to an Ordinary Telephone
In order to avoid mutual disturbance between telephone and terminal resulting in poor voice
quality, maintain 1.5m between telephone and terminal.
2) The Installation for Connecting to Billing Device for Metering
If the users demand to register cost during calls, the billing device can be connected between
the terminal and an ordinary telephone. The billing device registers cost according to the
anti-polarity signal that is provided by the terminal.
3) The Installation for Connecting to PBX for Call Extensions
If users want to connect small PBX tot his terminal, connect terminal’s “Phone port” to the PBX.
Name
Quantity
Remark
MS130v4
1pcs
Quadband
AC-adapter
1pcs
AC-110-240V, DC 12V/1A
Antenna
1pcs
Magnetic Antenna with 3m
cable
User’s Manual
1pcs
English
