11
IMPORTANT:
If Polly’s batteries go dead or they
are removed or the RESET button is pressed or the
ON/OFF SWITCH is moved to the OFF position, you must
reset both the Clock and the Alarm by repeating the
procedures.
ATTENTION:
Be careful not to touch the TOUCH
Sensor during this programming process or you will
have to start over.
To set the Alarm:
In setting Polly’s alarm, you have 2 choices as to
how you’d like him to wake you up in the morning. Polly
can either wake you up by talking to you or can make a
"Alarm" sound. Here’s how to set him.
Press the MODE BUTTON and the CLOCK BUTTON
for 3 seconds and release. You’ll hear a Polly say "Wake
Up!". You are in Alarm set mode.
To select a wake-up time, repeat the same process
for setting the Clock using the same method and
buttons. Polly will wake you up by yelling "Wake Up!". If
you want to wake up with an Alarm sound instead, press
the MODE BUTTON and REC BUTTON for 3 seconds.
You’ll hear 4 siren alarm sounds. That tells you the alarm
is set.
Polly will shut himself off in a short period after his
alarm goes off. You do not need to press any of his
buttons to make him stop.
Содержание POLLY
Страница 1: ...14614 ...
