background image

                                           

                               GSI 200 TIMER/BACK COVER REPLACEMENT 

                                                                        Installation Instructions 

 

REPLACING THE TIMER CIRCUIT BOARD REQUIRES REPLACEMENT OF THE BACK PANEL 

 
 
 
 

Timer Housing Back Cover 

 
 
 

Timer Circuit Board 

All Models  

1.

 

Install two (2) fresh AA batteries in timer housing 
noting proper polarity (+/-). 

 
 
 
 
 
 
 
 
2.

 

Verify timer circuit board is in the correct 
position.  Snapping the control board under all 
four legs will correctly position the control board. 
The circuit board is incorrectly positioned if both 
lights (red and green) flash at the same time when 
the rear cover is installed

 
 
 
 
 
 
 

 

3.

 

Verify the small key slots are on the right side 
when viewed from the front of the timer housing. 
Align sachet holder mounting plate holes with 
pins in the timer cover housing and snap into 
place. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

4.

 

Use four pan-head screws to secure the back 
cover/sachet mounting plate to the timer housing.  

5.

 

Attach sachet holder to mounting plate.  Final 
assembly will be with sachet holder opening 
facing up. 
a.

 

Rotate sachet holder 90

 clockwise. 

b.

 

Refer to table to determine if upper or lower 
keyhole slots are used.  Place left side pin in 
the sachet mounting plate keyhole.  

c.

 

Rotate sachet holder 90

 counterclockwise and 

place right side pin in keyhole slot. 

d.

 

Push sachet holder down into keyhole slots to 
secure. 

 
 
 
 
 
 
 
 
 
 
 

Manitowoc Ice, Inc.                                                                                                                                                            
2110 South 26th Street, P.O. Box 1720, Manitowoc, WI  54221-1720 USA                                                                                                       8014383

 

Telephone 920-682-0161, Fax - Sales:  920-683-7589, Service/Parts: 920-683-7585, Other:  920-683-7879                                               Sheet 1 of 2 
Web Site - www.manitowocice.com                                                                                                                                                                     03/12/03 

RESET BUTTON 

FINAL POSITION IS 

WITH OPENING 

FACING UP 

ROTATE 90

 TO 

ATTACH LEFT SIDE, 

THEN ROTATE TO 

FINAL POSITION TO 

ATTACH RIGHT SIDE 

Attach Sachet 

Mounting Plate to Back 

Cover Pins 

Upper Keyhole Slot 

Small Keyhole Slots on 
right side when viewed 

from front 

Lower Keyhole Slot 

PLACE TIMER BOARD ON 

THE FOUR SUPPORTS 

SNAP THE CONTROL BOARD UNDER 

ALL FOUR LEGS TO SECURE 

POSITIVE 

TERMINALS

Отзывы: