Manitowoc Grove TMS800E13, Руководство оператора

Страница: 67 / 168

GROVE
3-19
TMS800E13 OPERATOR MANUAL OPERATING CONTROLS AND PROCEDURES
3
Published 02-06-2014, Control # 495-00
Load Presets Screen
The load presets screen (Figure 3-6) allows the operator to
view/load from three different presets (labeled Preset 1,
Preset 2, and Preset 3) or to load the “No Preset” option,
which is the set of default values. If the ESC button is
pressed at any time, no preset will be loaded and the
operator will be returned to the menu screen.
Engine Fault Active Indicator (1) (Figure 3-6)
This indicator will become visible whenever there is an active
engine fault. The operator should return to the fault screen to
view the active fault(s).
System Fault Active Indicator (2)
This indicator will become visible whenever there is an active
system fault. The operator should return to the fault screen to
view the active fault(s).
Current Visible Preset Selection (3)
Displays the name of the presets shown on-screen. Values
can be Preset 1, Preset 2, Preset 3, or No Preset.
Display Next Preset Button (4)
Pressing this button cycles through the presets.
Load Current Preset Button (5)
Pressing this button will load the currently visible preset into
memory and then return the operator to the main screen.
This preset will be active until another preset (or the default)
is loaded.
FIGURE 3-6
Item Description
1 Engine Fault Active Indicator
2 System Fault Active Indicator
3 Current Visible Preset Selection
4 Display Next Preset Button
5 Load Current Preset Button
Reference Only