manualshive.com logo in svg

Manitowoc GROVE GMK 6400, Руководство по эксплуатации

Поделиться
Скачать
Manitowoc GROVE GMK 6400 Скачать руководство пользователя страница 252

Driving
5.6 Heating and air-conditioning system

5 - 80

3 112 993 en

Operating manual GMK 6400

1

2

.0

7.

201

3

Setting the 
heating period

After an automatic start, the auxiliary heater switches itself off as soon as 
the set heating period has elapsed. 
The heating period applies to all saved heating starts. 

•

Switch off the auxiliary heating using the (

1

) button.

•

Press the button (

2

) for longer than 3 seconds.

The last set heating period, e.g. 27 minutes, now flashes for 5 seconds in the 
display field. 

s t

•

Set the desired heating period on the flashing display. You can set a heat-
ing period of 10 to 120 minutes.

Wait for approx. 5 seconds until the current time is shown, e.g. 14:00 hrs. 

A new heating period has now been set. 

Switching the 
automatic heating 
start on and off

To switch on an automatic heating start, you must retrieve the correspond-
ing storage location.

•

To retrieve a storage location, press the button (

1

) once. 

The display field flashes for 5 seconds and a storage location is shown 
(e.g.

2

). The heating start at this storage location is now switched on.

To switch on a different heating start, press the 

u

 button repeatedly until 

the desired storage location is displayed. This heating start is switched on 
as soon as the display stops flashing.

To deactivate the automatic heating start, press the 

u

 button repeatedly 

until no storage location is displayed any longer. 

Содержание GROVE GMK 6400

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды