Manitowoc Grove GMK 5200-1, Руководство по обслуживанию

Страница: 136 / 346

Maintenance work on the carrier
7.9 Axle lines
7 - 64 3 302 746 en Maintenance manual
GMK5200-1
0
9
.0
3.
201
8
Prerequisites – The truck crane must be raised on outriggers or parked over an inspection
pit.
– The engine must be switched off and secured against unauthorised use;
à
p. 2 - 3.
2
nd
and 5
th
axle
lines
•
Place a receptacle under the screw ( 2 ).
•
Unscrew the screws ( 1 ) and ( 2 ) and allow the
oil to drain off.
•
Fit a new gasket and tighten the drain
screw (
2 ).
•
Fill the oil up to the lower edge of the open-
ing.
•
Fit a new gasket and tighten the drain
screw (
1 ).
3
rd
axle line This axle centre drive is available only with the 10 x 8 x 10 drive and is
flanged directly to the transfer case;
à
Transfer case , p. 7 - 49.
•
Place a receptacle under the screw ( 2 ).
•
Unscrew the screws ( 1 ) and ( 2 ) and allow the
oil to drain off.
•
Fit a new gasket and tighten the drain
screw (
2 ).
•
Fill the oil up to the lower edge of the open-
ing.
•
Fit a new gasket and tighten the drain
screw (
1 ).
O
Risk of environmental damage due to leaking consumables.
Always let consumables drain into suitable receptacles. Wipe up any con-
sumables that have leaked.
Store/dispose of consumables and any soaked equipment properly.
Ask about the applicable regulations.