Manitowoc 16000WA, Руководство оператора

Страница: 37 / 110

Reference
Only
Manitowoc
Published 03-18-13, Control # 116-09
4-7
16000 WIND ATTACHMENT OPERATOR’S MANUAL SET-UP AND INSTALLATION
4
Handling Components
The boom sections are equipped with lifting lugs as shown in
Figure 4-5. The four-leg lifting sling can be used to lift the
boom sections.
It will be easier to connect the boom sections together if the
rear end of the section being lifted hangs lower than the front
end of the section. Grab hooks (4) are provided so two legs
of the lifting sling can be shortened as desired.
WARNING
Tipping Hazard
Block ends of crawlers, if required, before you attempt to
raise or lower boom from or to ground.
WARNING
Falling Load Hazard!
Lifting lugs on a particular boom section are designed only
for lifting that section only. Do not attempt to lift two or
more boom sections with lifting lugs only on one section.
Lifting lugs may break allowing boom sections to fall.
When lifting lugs are not used:
• Lift against chords only, never against lacings.
• Use nylon lifting slings. If wire rope or chain slings are
used, install protective covering (such as sections of
rubber tire) between slings and chords.
Item Description
1 Insert
2 Lifting Lug (4)
3 4-Leg Lifting Sling (chain)
4 Grab Hook
FIGURE 4-5
2
3
1
4