Saving Multis
Use the
DATA
-knob to browse through the menu levels until you reach the "Sound Settings" page.
Select "
M:
" and enter the multi menu. Selecting "Save Multi" allows you to enter a name for the multi
in question.
Turn the
DATA
-knob to select characters and numbers and push the
DATA
-knob to add them to the
multi name. By using
[BACKSPACE]
you can delete the last character entered. When you are done,
use
[SAVE]
to store the multi.
If a multi of the same name already exists on the memory card, a warning message will pop up. You
will be asked whether the existing multi is to be replaced with the new one or not. If you hit "
No
" the
process will be aborted, "
Yes
" will complete it and take you back to the sound settings page.
Deleting Multis
This function deletes multis from an inserted memory card. If you wish to delete a multi from the
Memotron Rack's internal memory (RAM), please refer to the section "Initialising Multis" on page 13.
To delete a multi from a memory card, please enter the multi menu. Selecting "Delete Multi" will open
the file directory.
Browse through the file system and select the desired multi. To quit the deleting process and leave the
directory, simply hit the
ESC
button.
When pushing the
DATA
knob, a warning message will pop up. If you hit "
No
", the process will be
aborted. Hitting "
Yes
" will complete it and take you back to the sound settings page.
!
The finished initialisation process can not be made undone – please pay attention!
Memotron Rack OS v1.1 User Manual
12
