![Manikin Electronic Schrittmacher Скачать руководство пользователя страница 17](http://html1.mh-extra.com/html/manikin-electronic/schrittmacher/schrittmacher_user-manual_700723017.webp)
Using the
Mode
line parameter you set the play mode of a line. The following modes are possible:
->
Forward
<-
Backward
<->
Ping pong; the first and last steps are played once
<=>
Forward / backward; the first and last steps are played twice
?
Random
The
Mode
line parameter can be linked with and controlled by a
Mode
line.
First, Last
First
indicates the step of a line with which it starts.
Last
indicates the step with which the line ends.
Set one value each from 1 to 16 for either line parameter to define these steps. If one of the steps is
skipped, the line is automatically started or ended with the next step. Only those steps are played that
are between
First
and
Last
.
As an alternative, you can also define
First
and
Last
with the loop function. For more information
about the loop function we refer you to the “Loop” section on page 24.
Sync Mode, Sync Base
With
Sync Mode
you can set automatic or manual synchronization of the line (by pressing the
Sync
button). Synchronization follows the time set in the
Sync Base
line parameter. For the table indicating
the values to be set we refer you to page 29. For further information about synchronization we refer
you to the “Sync” section on page 24.
Gate
The time interval between to consecutive steps is defined by the
Gate
line parameter. The interval can
be set within the range from 1/384 to 16 1/1 notes. For the table indicating the values to be set we
refer you to page 29.
The
Gate
line parameter can be linked with and controlled by a
Gate
line.
Len
The
Len
line parameter can only be found for
Note
lines.
Len
determines the length of the notes
played and can be set within the range from 1/384 to 16 1/1 notes. For the table indicating the values
to be set we refer you to page 29.
i
Setting
Len
is limited by the
Gate
line parameter, i.e. a note is only held until
a new note is struck.
The
Len
line parameter can be linked with and controlled by a
Len
line, Key or Ctrl1-8.
Schrittmacher - Manual
15
Содержание Schrittmacher
Страница 1: ...User Manual OS V1 0d...
Страница 2: ......