MSKL MS-3020 User Manual
Figure 3-2
3.
HDDs power LED blinks red for 1 second and green for 9 seconds
The system has detected a bad track. Please get a good hard disk drive.
4.
The System doesn’t show all HDDs in normal mode
Inspect the BIOS screen while booting up the system. See if it display LUN=3. If not, follow
the BIOS setup procedure stated in 2.3.
5.
The HDDs capacity isn’t found in the system
There let’s take Windows XP as an example.
•
Right-click “My Computer” and enter “Manage”.
•
Choose “Disk Management” under “Storage”, and a given hard disk drive ID will
appear on the right lower corner of the windows.
•
If the newly installed hard disk drive doesn’t appear on the screen, it might be
improperly installed or damaged. Try again.
