Channel Scanning
1. Automatic Sat Scan
With the Auto SAT Scan function, you can perform TV-channel scanning on one or
more satellites. Before proceeding, you need to make sure all the parameters for
satellite connections are set correctly. For the satellite parameter setting for a
dedicated connection mode.
(1)After the satellite parameter setting, press <Green>. The Auto Sat Scan page
will appear.
(2)Press <Up/Down> buttons to select the Program to set the type of the program you
want to scan. The program type has two options, Free only and All.
(3)Press <Up/Down> to select the NIT mode. Search and add the TPs by referencing
to the satellite NIT Table, and scan for the program channels from all the TPs.
(4)If your intention is to scan one specific satellite, you need to specify it first.
(5)Press <Up/Down> buttons to select your Scan Mode. The options here include:
Default TP Mode:
Scan only the channels from preset Tps, and will not try to add a
new TP.
One TP Mode:
Search and add one TP by referencing to the satellite NIT Table,
and scan for the program channels from the TP.
Blind Mode:
Automatically search Tps in the IF range, and scan the TV-channels
available form the Tps found.
(6)Press <Up/Down> to confirm your Scan Select. In here, you can
choose to apply the scan on one or more satellites to scan.
* only the satellites checked in the setup manual can be scanned. You
can't scan an unchecked satellites.
(7)Press <Green> button. Start scan
2. Manual Scan
This feature provides you a way to scan channels from the TPs specified by your
own customized settings such as Frequency, Symbol Rate, Polarity, NIT, and
Program. Before proceeding, you need to make sure all the parameters for
satellite connections are set correctly. For the parameter setting for a dedicated
connection mode.
(1)After the parameter setting, press <OK>. The Manual Scan page will be open.
(2)Press <OK>, and select your desired satellite from the satellite list.
(3)Using the <0~9> keys to set your desired Frequency and symbol rate, range
from 0 to 65535.
(4)Using the <Left/ Right> buttons to set Polarity, NIT, Program type.
(5)After finishing above-mentioned settings, Press <Green>. Then, the Manual Scan
will start.
7
