For Socket T Intel Pentium 4 installation:
9. If using a speed
controller, connect it to
the fan’s power cable.
12. Installation is
complete.
10. Connect the power
cable of the cooler to
the motherboard.
11. If applicable, attach
the speed controller.
1. If applicable, remove
the original retention
clip and CPU cooler.
4. With the frame off, fit the
P4 clip on the metal nub
at the bottom of the unit.
2. Attach the rear section
of the P4 holder to the
motherboard underside.
3. Apply an even layer
of thermal compound
on the CPU.