USB 2.0 Windows 98SE Installation
1. Place the installation CD in the CD-ROM drive and connect the external enclosure to your computer.
Auto Detect will run the Add New Hardware wizard, which searches for the USB 2.0 external enclosure.
Click "Next."
2. Select "Search for the best driver for your device (recommended)" and then click "Next."
3. Click "Specify location"; browse to "CD-ROM E:\USB 2.0-98 Drive"; then click "Next."
4. With the prompt "Windows driver file search for the device Hi-Speed USB-to-IDE Bridge Controller,"
click "Next."
5. With the prompt "Windows has finished installing the software that your new hardware device requires,"
click "Finish."
NOTE:
For Windows Me/2000/XP/Vista, no need to install the additional driver: It’s already installed.
Windows XP needs to be updated with SP2.
specifications
• 44-pin IDE internal connection
• Hi-Speed USB 2.0 mini B
external connection
• Prolific PL-2506 chipset
• DC power input jack (adapter
not included)
• Meets current Hi-Speed USB
2.0 & IDE/ATA133 standards
• External DC power adapter
cannot exceed 5 V / 1 A (not
included)
• 14 x 8 x 1 cm (5.1 x 3.0 x 0.5 in.)
• 78 g (2.5 oz)
System Requirements
• Pentium 266 MHz or higher
• 64 MB RAM
• Windows 98SE/Me/2000/
XP/Vista or MAC OS 9.0 and
above
Package Contents
• External Enclosure
• USB cable, A-type male x 2 to
mini B male, 1.2 m (4 ft.)
• User manual and travel bag
