confirmed by an on-screen illustration, with a circle highlighting the new device and without
any yellow, red or green question mark. After finishing the setup, the USB device will be
found in "My Computer."
Setup for Windows Me/2000/XP
Under Windows Me/2000/XP, the system can find and set up "USB Mass Storage Device"
directly.
NOTE:
Partition and format any new hard disk drive (HDD) into FAT16 or FAT32 segments prior
to connecting to the Hi-Speed USB 2.0 to SATA 150 Adapter. If your HDD partition is NTFS or
UNIX, format as FAT16 or FAT32 before connecting the adapter.
NOTE:
A typical USB can provide 5 V / 500 mA of power to a USB device. For 2.5" drives,
it’s recommended that a PS/2 cable be used (connecting the adapter to the keyboard) if the
HDD operating current is more than 500 mA.
