4
hardWare instaLLation
Batteries
1. Slide the battery
cover off the mouse.
2. Insert the 2 included
AAA batteries, matching the
+/– polarity as marked inside the
battery compartment.
3. Replace the battery cover.
4. On the underside of the mouse,
set the Power switch to On. (The
LED will light.)
Connecting to a Dongle/Drive
Before installing the MLBX Wireless Laser Mobile Mini
Mouse, make sure that the Bluetooth protocol is available
on your computer — either on the hard drive or through a
Bluetooth dongle inserted in a USB port — as indicated
by the Bluetooth icon (right), which typically appears
in the lower-right section of your desktop system tray.
Different software is available to enable installation, such
as Widcomm or IVT (whose screen images are presented
in the procedures below as examples); otherwise, the built-
in Microsoft software can be used (the second connection
procedure of the three listed below).
Power switch
Laser
Connect
button
