open the battery compartments on the bottom of both the keyboard and
the mouse, insert the batteries, then replace the compartment covers.
connecting the receiver
The wireless keyboard and optical mouse use digital radio technology
to communicate, transmitting RF signals that are picked up by the
receiver and then passed to the computer. The receiver is connected
to the computer’s PS/2 ports (Model 172554) or USB ports (Model
175579) with a cable: the green connector to the mouse port; the
purple connector to the keyboard port.
For optimal performance, place the receiver at least 20 cm (approx. 8
inches) away from any computer components, including monitors, as
they can cause radio interference.
NOTE:
This keyboard/mouse set is Plug and Play; that is, it needs no
software installed. If any software was installed to operate previous
keyboards or mice, remove the driver(s) before using this set.
CAUTION:
Turn off the computer before connecting the receiver, and
avoid placing the receiver on a metal surface, as this can reduce the
RF performance.
setting the id codes
After installing the batteries and connecting the receiver, turn on the
computer. Press the ID button on the receiver (see images above), then
ID
ID
BATT Low
Battery
compartment
ID
Scroll wheel
Receiver LED
