Verifying Controller Installation for Windows 2000/XP
1. Right-click on My Computer and go to Properties, then Hardware, then
Device Manager.
2. Double-click “SCSI and RAID Controllers.” If no yellow exclamation
point (!) or question mark (?) appears to the left of “Silicon Image SiI
3x12 SATALink Controller,” then the driver has started properly.
3. To view information about the devices attached to the controller, right-
click “Silicon Image SiI 3x12 SATALink Controller” and go to Properties
(on the context menu). Then go to Device Info to see the information.
Verifying Controller Installation for Windows Vista
1. Click the Start icon, then right-click on Computer and go to Manage (on
the context menu). If a “User Account Control” prompt displays, click
“Continue.”
2. Go to Device Manager in the left-hand panel, then double-click on
Storage Controllers in the right-hand panel. If no yellow exclamation
point (!) or question mark (?) appears to the left of “Silicon Image SiI
3x12 SATALink Controller,” then the driver has started properly.
3. To view information about the devices attached to the controller, right-
click “Silicon Image SiI 3x12 SATALink Controller” and go to Properties
(on the context menu). Then go to Device Info to see the information.
SPeCIfICATIonS
Standards and Certifications
• PCI Specification, revision 2.2
• SATA 1.0
• FCC
• CE
General
• 32-bit, 33/66 MHz fully compliant PCI host
• 48-bit LBA supports HDD larger than 137 GB
• Supports two independent SATA 150 channels
• Silicon Image chipset
• Data transfer rate up to 1.5 Gbps
