6
Remote Control
Standby:
Press to either place the system in
standby mode or remove it from standby
mode.
Mute:
Press to mute the sound; press again
to restore the sound.
Reset:
Press to restore all settings to the
original factory settings.
Source:
Press to toggle between the
Virtual 5.1 and 5.1 Channel settings.
Subwoofer Volume:
Press (–) to lower the
bass volume; press (+) to raise it.
Master Volume:
Press (–) to lower the
overall system volume (including bass);
press (+) to raise it.
NOTE:
If the remote control fails to work
properly, ensure that the battery is good
(one is included in the package) and there are no obstacles blocking
the remote control signal.
Suggestions for Setup & Operation
• If only one speaker emits CD audio when the system is plugged into
a headphone jack, it’s because WAV files and games normally
transmit only one track of audio.
• If one or more of the speakers don’t provide sound once power is on,
check all connections and controls.
NOTE:
If adjusting the bass
control doesn’t affect the audio output, it could simply be that the
signal source doesn’t include frequencies below 150 Hz.
66
