Manhattan 150040, Руководство пользователя

Страница: 3 / 8

SofTwArE INSTALLATIoN
Windows 2000, XP, Server 2003 Fresh OS Installation
Follow the instructions in this section if you are performing a new installation of Windows 2000,
XP or Server 2003 and you wish to boot from a device attached to the SATA port.
1. Turn off power to the system. Insert the SATA 300 PCI Express Card into an available PCI slot.
Connect SATA cable(s) from the SATA port to the SATA device(s). Turn the power on.
2. Put your Windows 2000/XP or Server 2003 CD into the CD-ROM/DVD drive (or the
2000 boot diskette #1 in the floppy drive if your system cannot boot from the CD).
3. Press F6 for third-party SCSI or driver installation at the beginning of text mode installation.
Press "S" when the setup asks if you want to specify an additional device, and insert the
driver CD. Press "Enter" and select "Silicon Image SiI 3132 SATALink Controller."
4. Press "Enter" again when prompted to continue with text mode setup.
5. Follow the setup instructions to select your choice for partition and file system.
6. After setup examines your disks, it will copy files from the CD to the hard drive selected above
and restart the system. After restart, the setup process will resume to finish the installation.
7. Once the operating system installation is completed, you can follow the Verifying Installation
instructions to confirm that the controller was installed correctly.