4
2. Insert the source Hdd in Bay
A and the target Hdd n Bay B.
NOTE:
The capacity of the
target (slave) Hdd
must be
greater
than the capacity of
the source (master) Hdd;
otherwise, the cloning can not
be properly completed.
3. When the A and B leds light,
toggle the Power switch (on
the rear panel) to on.
4. Press the Clone button for
3 seconds. When the led
lights, press the Clone button
again. The leds will light to
indicate progress (25%, 50%,
75% and100%). All the leds
will light when the cloning
process is complete.
5. Turn the power off and
remove the drives.
Front view: LED indicators
Top view: HDD bays
PowER
DiSk
maSTER
25% 50% 75% 100%
DiSk
SLavE
Bay A
(master/source)
Bay B
(slave/target)
Clone
button