STEP 3
4
DETAIL 1
• Line the floor with the foam
mantle of the packing to
protect the parts and
arrange the Panels (01)
and (02) with the rear face
upwards, correctly checking
the position of each
according the holes and
as shown in the drawing.
• Align the edges of the
Panels (01) and (02) and
fix them together by
applying the steel plates
(JC) with bolts (P2), as
shown in the DETAIL 1.
• Position the Rear Columns
(03) behind the Panels (01)
with dowels (CA1) according
to the drawing, and fix
them with bolts (P30).
• Fix Rear Bar (04), positioning
it correctly behind the panels
with dowels (CA1) and glue (SC)
and applying the bolts (P30).
ATTENTION!
APPLY GLUE.
03
04
02
01
Rear face
Rear face
STEP 1
03
01
Rear face
06
07
06
• Fix the Top Panel (07) and
the Left Base (08) in the
Side Panel (06) with
dowels (CA2) and
Minifix hardware (P6+TM),
as shown in the DETAIL 2.
• Fix the Top Panel (07)
and the Right Base (09)
in the Side Panel (06)
with dowels (CA2) and
Minifix hardware (P6+TM).
• Fix the supports for glass
(SV) in the Side Panels (06)
with bolt (P1).
STEP 2
DETAIL 2
07
08
09
• Fix the Upper Shelf (05) in
the Panels (01) and (02),
applying dowels (CA2) and
bolts (P10) in the indicated
positions in the drawing.
• Fix the sets of Top Panel (07),
Side Panel (06) and Left Base
(08) and of Top Panel (07),
Side Panel (06) and Right Base
(09) in the Panels (01) and (02),
applying dowels (CA2) and
bolts (P10) in the indicated
positions in the drawing.
• Fix the support for glass (SV)
in the Middle Panel (02) with
bolt (P1).
06
01
Front face
02
Front face
01
Front face
07
07
08
09
05