STEP 6
6
DETAIL 4
ATENTION!
Before installing the furniture, check the conditions of
the wall for strength to properly support and anchor the
weight of the suspended furniture, including equipments
and objects that may be installed on the shelves.
The Kap Toggle bushings (K) supplied with the product
are for hollow walls or dry wall type. Check the type of
the wall on which the installation will be made and, if
necessary, look for more suitable bushings or devices.
To mark the position and fix the furniture on the wall,
check the level of the parts.
• Place the furniture already assembled according to
steps 1, 2 and 3 on the site and at the desired height
for the installation and mark the position of the two
holes on the wall to fixation, as shown in the drawing
and using the two holes indicated in the side panels
(02) and (03) as reference.
• With electric drill and drill bit Ø1/2 inch, make the
two holes in the wall.
• Apply the bushings (K) into the two holes in the wall.
• Reposition the furniture in the place and apply the
bolts 1/4 x 2.1/4 inches as shown in the drawing, for
fixing the Side Panels (02) and (03) at the bushings
(K) already applied on the wall.
STEP 7
1/2 inch hole
in the wall
Kap Toggle
bushing ( K )
Bolt
1/4 x 2.1/4"
02
01
03
04
• Install the Base for keyboard (08), fitting it so that
the metallic slides slide smoothly.
• At the end the fixation, apply the plastic covers (L)
over the bolts used for fixation on the wall.
• Insert the plastic covers (J) into the holes for pass
wires in the Top Panel (01) and in the Shelf (04).
• Apply the adhesive covers (I) on the remaining
apparent holes and bolts.
08
01
02
03
04