STEP 7
• Fix the metallic feet (14) under
the Base (08) with bolts (I).
Pay attention to the position of
the feet, as shown in DETAIL 3.
• Apply the adhesive protective felt to
the lower end of the feet (14).
• Fit the Front Frame (07) under
the Top Panel (04) and between
the Side Panels (05) and (06) and
fix it into the Top Panel (04), the
Side Panels (05) and (06) and
the Partitions (01) and (02) with
metal brackets (E) and bolts (F),
as shown in DETAIL 4.
STEP 6
STEP 5
DETAIL 4
5
DETAIL 3
BOTTOM VIEW / POSITION OF THE FEET
01
02
03
06
05
08
04
STEP 8
14
14
14
14
Assembling the divider "T":
• Connect the Largest Part (09)
into the Smaller Part (10) with
dowels (A) and bolts (B).
Installing the divider "T":
• Install the divider "T" (already
assembled, according to STEP 07),
fitting it through the rear of the
rack between the Right Partition (02)
and the Right Side Panel (06).
ATTENTION! This should always
be done before fasten the back
panels of the rack (see STEP 9),
unless you choose not to install
the divisor "T" in the furniture.
04
07
02
01
05
06
03
08
REAR VIEW
REAR VIEW
REAR VIEW
09
10
09
10
04
03
05
01
08
06
02
Adhesive
Protective
Felt