background image

ATTENTION

To avoid serious or irreparable damage to the product, follow the instruc ons carefully.

TAKING GOOD CARE OF YOUR CABINET

Cleaning and caring instructions:
- Avoid dragging objects on top of the cabinet. They might scratch the 
finishing.
- Only non-abrasive natural chemical products are recommended to clean 
your cabinet. Simply wipe the cabinet down with a wet cloth to remove the 
cleaning product excess.
- Never clean the cabinet with scouring powders, steel scrubber pads or 
any other product which can scratch its surface.
- Chemical products are not recommended.
- Cabinet surfaces should not be covered with colored plastic or paper 
sheets.
- Acid substances like salt, onion, ketchup and mustard must remain 
properly stored in sealed containers.
- Avoid the direct contact of water with other surfaces than the sink, as the 
humidity can affect the durability of the cabinets.
- Avoid cabinets exposure to direct Sun light. Drapers suggested.
- For technical assistance outside Brazil, please, contact the store where 
you purchased your product.
- This guidance should be saved for future reference, if necessary.

BEWARE:

 Do not use a damp cloth to clean the cabinet. Excessive 

moisture can damage its surface.

Содержание 8GMC1

















Отзывы: